Acta academica karviniensia 2021, 21(2):54-65 | DOI: 10.25142/aak.2021.012

Úroveň štíhlosti výrobních podniků - průzkum zavedení štíhlé výroby

Michal Medonos
Brno University of Technology, Faculty of Business and Management, Kolejní 2906/4, 612 00 Brno

Lean manufacturing is a well-known methodology to optimize company processes towards the increase of company performance. Despite the fact its benefits were confirmed over many years, the rate of successful implementations is questionable. This article focuses on an evaluation of the leanness level given by a level of implementation of lean manufacturing methodology in manufacturing companies. It brings results gained from the survey made in the production companies related to the Czech Republic. The survey focused on an evaluation of the use of basic lean manufacturing tools. Based on acquired data, the leanness level of the companies was calculated. Results showed that an overall average leanness level is 56%. Big differences between large companies and small and medium companies were found. A gap between theoretical promoted tools and their utilization in real companies was found as well. There is a discussion on the possibility of improving the level of leanness.

Klíčová slova: lean manufacturing, lean tools, leanness, performance measurement, production management.
JEL classification: M11

Vloženo: 23. duben 2021; Revidováno: 14. květen 2021; Přijato: 3. listopad 2021; Zveřejněno: 8. listopad 2021  Zobrazit citaci

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Medonos M. Úroveň štíhlosti výrobních podniků - průzkum zavedení štíhlé výroby. Acta academica karviniensia. 2021;21(2):54-65. doi: 10.25142/aak.2021.012.
Sdílet...
Stáhnout citaci
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Zobrazit celý článek

    Reference

    1. ANVARI, A., N. ZULKIFLI and R. M. YUSUFF, 2013. A dynamic modelling to measure lean performance within lean attributes. The International Journal of Advanced Manufacturing Technology, 66(5-8): 663-677. ISSN: 0268-3768. Přejít k původnímu zdroji...
    2. BHAMU, J. and K. S. SANGWAN, 2014. Lean manufacturing: literature review and research issues, International Journal of Operations & Production Management, 34 (7): 876-940. ISSN: 0144-3577. Přejít k původnímu zdroji...
    3. BIDHENDI, S. S., S. GOH and A. WANDEL, 2019. Development of a weighted leanness measurement method in modular construction companies. Journal of Industrial Engineering International, 15(4): 603-625. ISSN: 1735-5702. Přejít k původnímu zdroji...
    4. BUER, S. V., J. O. STRANDHAGEN and F. T. S. CHAN, 2018. The Link Between Industry 4.0 and Lean Manufacturing: Mapping Current Research and Establishing a Research Agenda. International Journal of Production Research, 56 (8): 2924-2940. ISSN: 0020-7543. Přejít k původnímu zdroji...
    5. CHAUHAN, G. and T. P. SINGH, 2012. Measuring parameters of lean manufacturing realization. Measuring Business Excellence, 16(3): 57-71. ISSN 1368-3047. Přejít k původnímu zdroji...
    6. CHAY, T., Y. TIWARI and F. CHAY, 2015. Towards lean transformation: the analysis of lean implementation frameworks, Journal of Manufacturing Technology Management, 66 (26): 1031-1052. ISSN: 1741-038X. Přejít k původnímu zdroji...
    7. COCCA P., F. MARCIANO, M. ALBERTI and D. SCHIAVINI, 2019. Leanness measurement methods in manufacturing organizations: a systematic review, International Journal of Production Research, 57 (15-16): 5103-5118. ISSN: 0020-7543. Přejít k původnímu zdroji...
    8. COMM, A. R. and D. F. X. MATHAISEL, 2000. A paradigm for benchmarking Lean initiatives for quality improvement. Benchmarking: An International Journal, 7(2): 118-127. ISSN: 1463-5771. Přejít k původnímu zdroji...
    9. GÁLOVÁ, K., R. RAJNOHA and P. ONDRA, 2018. The use of industrial lean management methods in the economics practice: An empirical study of the production companies in the Czech Republic. Polish Journal of Management Studies, 17(1): 93-104. ISSN: ISSN: 2081-7452. Přejít k původnímu zdroji...
    10. HOFER, C., C. EROGLU and A. ROSSITER HOFER, 2012. The effect of lean production on financial performance: The mediating role of inventory leanness. International Journal of Production Economics, 138(2): 242-253. ISSN: 0925-5273. Přejít k původnímu zdroji...
    11. JADHAV, J. R., S. S. MANTHA and S. B. RANE, 2014. Exploring barriers in lean implementation, International Journal of Lean Six Sigma, 5 (2): 122-148. ISSN: 2040-4166. Přejít k původnímu zdroji...
    12. JUNIOR, M. L. and M. G. FILHO, 2010. Variations of the kanban system: Literature review and classification, International Journal Production Economics, 125 (1): 13-21. ISSN: 0925-5273. Přejít k původnímu zdroji...
    13. KUMAR, R. and V. KUMAR, 2015. Lean manufacturing in Indian context: A survey. Management Science Letters, 5(4): 321-330. ISSN 1923-9343. Přejít k původnímu zdroji...
    14. LIKER, J., 2004. The Toyota Way: 14 Management Principles from the World's Greatest Manufacturer. McGraw-Hill, NY, ISBN 978-0-07-139231-0.
    15. LUCATO, W. C., F. A. CALARGE, M. L. JUNIOR and R. D. CALADO, 2014. Performance evaluation of lean manufacturing implementation in Brazil. International Journal of Productivity and Performance Management, 63(5): 529-549. ISSN: 1741-0401. Přejít k původnímu zdroji...
    16. NAYLOR, J. B., M. M. NAIM and D. BERRY, 1999. Leagility: integrating the lean and agile manufacturing paradigms in the total supply chain. International Journal of Production Economics, 62(1): 107-118. ISSN: 0925-5273. Přejít k původnímu zdroji...
    17. NORDIN, N., B. M. DEROS and D. ABD WAHAB, 2010. A survey on lean manufacturing implementation in Malaysian automotive industry. International Journal of Innovation, Management and Technology, 1(4): 374-380. ISSN: 2010-0248.
    18. OHNO, T., 1988. Toyota production system: Beyond large-scale production, Cambridge, Mass., Productivity Press. ISBN 0-915299-14-3.
    19. QING HU, R. MASON, S. J. WILLIAMS and P. FOUND, 2015. Lean implementation within SMEs: a literature review, Journal of Manufacturing Technology Management, 26 (7): 980-1012. ISSN: 1741-038X. Přejít k původnímu zdroji...
    20. RAJNOHA, R., J. DOBROVIČ and K. GÁLOVÁ, 2018. The use of lean methods in central eastern European countries: The case of Czech and Slovak Republic. Economics and Sociology, 11(2): 320-333. ISSN 2071-789X. Přejít k původnímu zdroji...
    21. SAMUEL, D., P. FOUND and S. J. WILLIAMS, 2015. How did the publication of the book The Machine That Changed The World change management thinking? Exploring 25 years of lean literature, International Journal of Operations & Production Management, 35(10): 1386-1407. ISSN: 0144-3577. Přejít k původnímu zdroji...
    22. SANDERS, A., C. ELANGESWARAN and J. P. WULFSBERG, 2016. Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing. Journal of Industrial Engineering and Management, 9 (3): pp.811-833. ISSN: 2013-8423. Přejít k původnímu zdroji...
    23. SANTOS BENTO, G. D. and G. TONTINI, 2018. Developing an instrument to measure lean manufacturing maturity and its relationship with operational performance. Total Quality Management & Business Excellence, 29 (9-10): 977-995. ISSN: 1478-3363. Přejít k původnímu zdroji...
    24. SHAH, R. and P. T. WARD, 2007. Defining and developing measures of lean production. Journal of Operations Management, 2007, 25 (4): 785-805. ISSN: 0272-6963. Přejít k původnímu zdroji...
    25. SINGH, B., S. K. GARG and S. K. SHARMA, 2010. Scope for lean implementation: a survey of 127 Indian industries. International Journal of Rapid Manufacturing, 1(3): 323-333. ISSN: 1757-8825. Přejít k původnímu zdroji...
    26. SUN, S., 2011. The strategic role of lean production in SOE's Development, International Journal of Business and Management, 6 (2): 160-168. ISSN: 1833-3850. Přejít k původnímu zdroji...
    27. TAYAKSI, C., M. SAGNAK and Y. KAZANCOGLU, 2020. A New Holistic Conceptual Framework for Leanness Assessment. International Journal of Mathematical, Engineering and Management Sciences, 5(4): 567-590. ISSN: 2455-7749. Přejít k původnímu zdroji...
    28. TUČEK, D. and J. DLABAČ, 2012, Lean production systems in practice, Proceedings of the 6th international conference on Applied Mathematics, Simulation, Modelling, pp. 161-166.
    29. WAN, H. D. and F. FRANK CHEN, 2008. A leanness measure of manufacturing systems for quantifying impacts of lean initiatives. International Journal of Production Research, 46(23): 6567-6584. ISSN: 0020-754. Přejít k původnímu zdroji...
    30. WICKRAMASINGHE, G. L. D. and V. WICKRAMASINGHE, 2017. Implementation of lean production practices and manufacturing performance. Journal of Manufacturing Technology Management, 28 (4): 531-550. ISSN: 1741-038X. Přejít k původnímu zdroji...
    31. WOMACK, J., D. JONES and D. ROOS, 1990. The Machine That Changed The World. Rawson Associates, NY, ISBN: 0060974176.
    32. WONG, W. P., J. IGNATIUS and K. L. SOH, 2014. What is the leanness level of your organization in lean transformation implementation? An integrated lean index using ANP approach. Production Planning and Control, 25(4): 273-287. ISSN: 0953-7287. Přejít k původnímu zdroji...
    33. ZAHRAEE, S. M., 2016. A survey on lean manufacturing implementation in a selected manufacturing industry in Iran. International Journal of Lean Six Sigma, 7(2): 136-148. ISSN: 2040-4166. Přejít k původnímu zdroji...

    Zpět na obsah